The Siemens 5SP4380-7RC is a SENTRON 5SP4 miniature circuit breaker (MCB) designed to provide reliable protection against overload and short-circuit conditions in electrical installations. With a 100 A rated current, 3-pole configuration, C tripping characteristic and 10 kA short-circuit breaking capacity, this Siemens MCB is suitable for a wide range of industrial, commercial and infrastructure electrical distribution applications.
The Siemens 5SP4380-7RC 100A MCB is designed for circuits where dependable protection and multi-pole switching are required. Its C characteristic makes it suitable for general-purpose electrical circuits and loads that can experience moderate starting or inrush currents. This makes the MCB a practical choice for distribution boards, industrial control panels, machinery and commercial electrical systems when correctly selected for the application.
The 3-pole configuration allows the device to be used in suitable three-phase electrical systems where three poles need to be protected and switched. Its 10 kA breaking capacity provides the ability to interrupt specified short-circuit fault currents within its applicable ratings, helping protect connected cables, equipment and electrical circuits during fault conditions.
As part of the Siemens SENTRON 5SP4 family, the 5SP4380-7RC is designed for professional circuit protection applications. It can be used by panel builders, OEMs, electrical contractors, system integrators and industrial maintenance teams looking for dependable Siemens MCB solutions.
The 100 A Siemens 3-pole MCB can be considered for higher-current distribution circuits, industrial electrical panels and equipment power circuits. The C tripping characteristic provides a balance between overload protection and tolerance for normal starting currents in appropriately designed circuits.
For correct MCB selection, the rated load current, cable capacity, prospective short-circuit current, ambient operating conditions and coordination with upstream and downstream protective devices should always be considered.
The Siemens 5SP4380-7RC 100A 3-pole C curve MCB can be used in:
The Siemens 5SP4380-7RC provides dependable protection for electrical circuits requiring a 100 A, 3-pole MCB with C characteristic. Its C tripping characteristic is commonly suitable for electrical circuits where connected loads can produce moderate starting or inrush currents.
The 10 kA short-circuit breaking capacity provides protection against specified short-circuit fault conditions. When correctly selected and coordinated, the MCB can help limit the effects of electrical faults and protect cables and connected equipment.
Its 3-pole construction makes the 5SP4380-7RC suitable for appropriately designed three-phase electrical systems. Using a single multi-pole protective device can also help maintain a clean and organized panel arrangement.
As part of the Siemens SENTRON 5SP4 range, the MCB can be incorporated into professional electrical distribution systems where compatible additional accessories may be required for signalling or monitoring functions.
The 100 A Siemens MCB is suitable for a variety of industrial and commercial environments, including manufacturing plants, machinery panels, electrical distribution systems, OEM equipment and infrastructure installations.
For customers sourcing Siemens circuit protection equipment in Faridabad, Delhi NCR, Noida, Gurgaon/Gurugram, Ghaziabad, Punjab, Mumbai, Pune, Ahmedabad, Hyderabad, Bengaluru/Bangalore, Chennai, Kolkata, Jaipur, Chandigarh and other major Indian industrial locations, the 5SP4380-7RC can be considered for suitable applications.
Always confirm the electrical characteristics and protection coordination before installation.
SB Smart supplies Siemens industrial electrical and automation products for OEMs, panel builders, electrical contractors, system integrators and industrial maintenance teams across India.
The Siemens 5SP4380-7RC 100A 3P C characteristic MCB is suitable for industrial and commercial customers requiring reliable Siemens circuit protection for electrical distribution and equipment applications.
SB Smart supports sourcing requirements across Faridabad, Delhi NCR, Noida, Gurgaon/Gurugram, Mumbai, Pune, Ahmedabad, Hyderabad, Bengaluru/Bangalore, Chennai, Kolkata, Chandigarh, Ludhiana and other major industrial locations across India.
1. What is Siemens 5SP4380-7RC?
It is a Siemens SENTRON 5SP4 miniature circuit breaker rated 100 A, 3-pole, with C tripping characteristic and 10 kA breaking capacity.
2. What is the rated current of 5SP4380-7RC?
The MCB has a 100 A rated current.
3. How many poles does the 5SP4380-7RC have?
It is a 3-pole (3P) miniature circuit breaker.
4. What is the tripping characteristic?
The device has a C tripping characteristic, commonly used for general electrical circuits with moderate starting or inrush currents.
5. What is the breaking capacity?
The specified short-circuit breaking capacity is 10 kA.
6. Where can this Siemens MCB be used?
It can be used in industrial distribution panels, commercial electrical systems, machinery, OEM equipment, control panels and suitable three-phase electrical installations.
7. Is this MCB suitable for three-phase applications?
Yes. Its 3-pole configuration makes it suitable for appropriately designed three-phase circuits, subject to correct system and protection selection.
|
Parameter |
Specification |
|
Product Model |
5SP4391-7RC |
|
Brand |
Siemens |
|
Series |
Betagard / SENTRON 5SP4 |
|
Type |
Miniature Circuit Breaker (MCB) |
|
Number of Poles |
3 Pole |
|
Rated Current |
100 A |
|
Tripping Characteristic |
C Curve |
|
Rated Voltage |
400 V AC |
|
Breaking Capacity |
10 kA |
|
Frequency |
50/60 Hz |
|
Mounting Type |
DIN Rail |
|
Protection Type |
Thermal magnetic |
|
Standards |
IEC 60898 |
|
Mechanical Life |
~10,000 operating cycles |
No reviews yet.