Product Description

Siemens 7RQ0100-0AR10 Plug-In Relay – 1CO, 5-Pin, 6A, 230V AC

The Siemens 7RQ0100-0AR10 is a SINOVA 7RQ plug-in relay with 1 changeover contact (1CO), a 5-pin configuration, 6 A contact rating, and a 230 V AC control supply. Siemens' official 7RQ selection data identifies this article in the 1CO, 6 A, 5-pin AC relay family. The relay is specified with a mechanical flag and LED indicator.

For SB Smart, this product is suitable for industrial control panels, electrical cabinets, machine-control circuits, relay interfaces, signalling, auxiliary switching, maintenance and replacement applications.

Siemens 7RQ0100-0AR10 Plug-In Relay

The 7RQ0100-0AR10 belongs to the Siemens SINOVA 7RQ plug-in relay range. Its plug-in construction allows the relay to be installed in a compatible socket, providing a convenient solution for industrial switching and control applications.

The relay has one changeover contact, allowing a single control signal to switch between normally open and normally closed circuits.

230 V AC Control Supply

The exact 7RQ0100-0AR10 operates with a 230 V AC control supply.

Siemens lists it as the 230 V AC variant within the 1CO, 6 A, 5-pin AC relay family. Other AC variants include 24 V, 48 V, 110 V and 115 V versions with separate article numbers.

The relay coil/control supply must match the specified 230 V AC article.

1 Changeover Contact

The relay provides 1 changeover contact (1CO).

A changeover contact consists of:

• Common contact

• Normally Open (NO) contact

• Normally Closed (NC) contact

This allows one relay to transfer a circuit between two output paths when the coil is energized or de-energized.

Typical applications include:

• Control-circuit switching

• Auxiliary switching

• Status indication

• Signal switching

• Electrical interlocking

• Alarm indication

• Machine-control circuits

The actual load must remain within the applicable relay-contact specifications.

5-Pin Configuration

The 7RQ0100-0AR10 uses a 5-pin plug-in configuration. Siemens identifies the 1CO, 6 A relay family as a 5-pin design.

The relay should be installed only in a compatible socket with the appropriate 5-pin mechanical and electrical arrangement.

6 A Contact Rating

The relay belongs to the 1CO, 6 A category. Current product listings confirm the 6 A rating for article 7RQ0100-0AR10.

The actual switching application should consider the load type, voltage, switching frequency and contact characteristics rather than relying only on the nominal current rating.

Mechanical Flag and LED Indicator

Siemens specifies mechanical flag and LED indicator as standard features for the 1CO, 6 A AC relay family.

The LED indicator provides a visible indication of relay energization, while the mechanical flag provides an additional visual indication of relay status.

These features can assist with:

• Panel inspection

• Troubleshooting

• Preventive maintenance

• Relay-status identification

• Control-circuit checking

Plug-In Construction

The relay uses a plug-in design, allowing it to be inserted into a compatible Siemens relay socket.

This arrangement makes maintenance easier because the relay can be removed without disturbing the fixed panel wiring.

The plug-in design supports:

• Easy relay replacement

• Reduced maintenance effort

• Convenient servicing

• Simplified troubleshooting

• Reusable socket wiring

Compatible Relay Sockets

For the Siemens 1CO, 6 A, 5-pin relay family, the corresponding mounting sockets are available separately.

The Siemens 7RQ socket range includes:

7RQ0201-1AX00 – DIN rail mounting socket

7RQ0202-1AX00 – PCB mounting socket

The appropriate socket should be selected according to the required installation method.

Industrial Control Applications

The 7RQ0100-0AR10 can be considered for compatible applications such as:

• Industrial control panels

• Electrical cabinets

• Machine-control systems

• Process-control circuits

• Relay interface systems

• Equipment signalling

• Alarm circuits

• Status indication

• Auxiliary switching

• Industrial machinery

• Maintenance and replacement applications

Control and Interlocking Applications

The 1CO contact arrangement allows the relay to perform a single changeover switching function.

Depending on the control-system design, it can be used for:

• Equipment status feedback

• Alarm indication

• Auxiliary control

• Signal switching

• Electrical interlocking

• Machine-status indication

• Control sequence functions

The exact application should follow the electrical circuit and load requirements.

Difference from 2CO, 6A Relay

The 7RQ0100-0BR10 is a 2CO, 8-pin, 6 A, 230 V AC relay, whereas 7RQ0100-0AR10 is a 1CO, 5-pin, 6 A, 230 V AC relay.

Therefore, the contact configuration and pin arrangement are different, and the corresponding sockets are different.

Difference from 1CO, 10A Socket

The relay is a 6 A, 1CO device, while the corresponding Siemens socket range includes 10 A 1CO socket articles.

The relay and socket should be selected as a compatible combination according to the relay configuration and application requirements.

Difference from DC Versions

Siemens also offers 1CO, 6 A DC relay variants such as:

• 24 V DC – 7RQ0100-0AC00

• 48 V DC – 7RQ0100-0AD00

• 110 V DC – 7RQ0100-0AE00

The 7RQ0100-0AR10 is specifically the 230 V AC version.

AC and DC versions should not be treated as interchangeable.

Replacement and Maintenance

The 7RQ0100-0AR10 can be used as a replacement where an existing installation requires a 1CO, 5-pin, 6 A, 230 V AC plug-in relay.

Before ordering, verify:

• Exact relay article

• Control-supply voltage

• AC or DC requirement

• 1CO contact configuration

• 5-pin arrangement

• 6 A rating

• Compatible relay socket

• Existing control-circuit requirements

This helps prevent selection of a similar relay with a different voltage, contact configuration or pin arrangement.

Suitable for Electrical Panel Builders and Industrial Buyers

The Siemens 7RQ0100-0AR10 is relevant for:

• Electrical panel builders

• Industrial buyers

• Electrical contractors

• Machine builders

• Maintenance departments

• OEM maintenance teams

• Control-panel assemblers

• Electrical product dealers

• Replacement-part procurement

For SB Smart, the product is positioned around industrial electrical product supply and procurement.

Technical Specification

The relay configuration and compatible socket articles are supported by Siemens' official 7RQ documentation.

Key Features

• Siemens SINOVA 7RQ plug-in relay

• Article number 7RQ0100-0AR10

• 1 changeover contact / 1CO

• 5-pin configuration

• 6 A contact rating

• 230 V AC control supply

• Mechanical flag

• LED indicator

• Plug-in construction

• Compatible with Siemens 7RQ relay sockets

• Suitable for industrial control, switching and signalling applications

Benefits

• 1CO switching: Provides one changeover switching function in a compact relay.

• 230 V AC coil: Suitable for compatible 230 V AC control circuits.

• 6 A contact category: Suitable for compatible relay applications within the specified rating.

• LED indication: Makes relay energization easier to identify.

• Mechanical flag: Provides a visible relay-status indication.

• 5-pin plug-in design: Supports convenient installation and replacement.

• Flexible socket options: Can be installed using compatible DIN rail or PCB sockets.

• Siemens standardized product: Simplifies product identification and procurement.

Why Choose Siemens 7RQ0100-0AR10?

The Siemens 7RQ0100-0AR10 is a 1CO, 5-pin, 6 A plug-in relay designed for 230 V AC control circuits, with a mechanical flag and LED indicator. Siemens' official product documentation confirms the article in the 1CO, 6 A, 5-pin AC relay family.

It is suitable for customers looking to buy or source Siemens 7RQ plug-in relays for industrial control panels, machine-control circuits, signalling, auxiliary switching, maintenance and replacement requirements.

For SB Smart, this product is best presented as a Siemens industrial plug-in relay for supply and procurement across India.

Delivery Across India

SB Smart supplies Siemens industrial electrical products and 7RQ plug-in relays across Faridabad, Gurgaon/Gurugram, Delhi NCR, Haryana, Noida, Punjab, Mumbai and other major Indian cities.

Major delivery locations include:

• Faridabad

• Delhi

• Gurgaon/Gurugram

• Delhi NCR

• Noida

• Greater Noida

• Haryana

• Punjab

• Mumbai

• Pune

• Ahmedabad

• Bengaluru

• Hyderabad

• Chennai

• Kolkata

• Jaipur

• Chandigarh

• Lucknow

• Indore

• Surat

• Vadodara

• Nagpur

• Coimbatore

• And other major cities across India

Frequently Asked Questions

1. What is Siemens 7RQ0100-0AR10?

The 7RQ0100-0AR10 is a Siemens SINOVA 7RQ plug-in relay with 1 changeover contact, 5 pins, 6 A rating and 230 V AC control supply.

2. What does 1CO mean?

1CO means the relay provides one changeover contact, with common, normally open and normally closed connections.

3. What is the control voltage?

The exact article is designed for 230 V AC.

4. How many pins does it have?

It has a 5-pin plug-in configuration.

5. What is the contact rating?

The relay belongs to the 6 A, 1CO category.

6. Does it have an LED indicator?

Yes. Siemens specifies an LED indicator for this relay family.

7. Does it have a mechanical flag?

Yes. The relay is specified with a mechanical flag.

8. Which DIN rail socket is compatible?

The corresponding DIN rail socket is 7RQ0201-1AX00.

9. Which PCB socket is compatible?

The corresponding PCB-mounted socket is 7RQ0202-1AX00.

10. What is the difference between 7RQ0100-0AR10 and 7RQ0100-0BR10?

7RQ0100-0AR10: 1CO, 5-pin, 6 A, 230 V AC

7RQ0100-0BR10: 2CO, 8-pin, 6 A, 230 V AC

11. What is the difference between 7RQ0100-0AR10 and 7RQ0110-0BR00?

7RQ0100-0AR10: 1CO, 5-pin, 6 A, 230 V AC

7RQ0110-0BR00: 2CO, 8-pin, 10 A, 230 V AC

12. Where can I buy Siemens 7RQ0100-0AR10 in India?

SB Smart supplies Siemens industrial electrical products and 7RQ plug-in relays in India for industrial buyers, panel builders, maintenance requirements and replacement procurement.