Product Description

Siemens 3NW60001 Cylindrical Fuse – 0.5A, 500V AC, 10 × 38 mm, gG

The Siemens 3NW60001 is a SENTRON cylindrical fuse link designed for low-voltage electrical protection applications. The exact article is rated at 0.5 A, 500 V AC, uses a 10 × 38 mm cylindrical format and has a gG operating class. Siemens identifies the product as part of its Cylindrical Fuse Links and Cylindrical Fuse Holders family and currently lists it as an active product.

For SB Smart, this product is positioned as a Siemens industrial electrical protection component for supply, procurement, replacement and maintenance requirements.

Siemens 3NW60001 Cylindrical Fuse

The 3NW60001 belongs to the Siemens SENTRON 3NW cylindrical fuse system, which is intended for compatible fuse-protection applications and selective line protection. Siemens identifies the exact article as a cylindrical fuse link, 10 × 38 mm, 0.5 A, gG, 500 V AC.

The fuse link provides protection against excessive current in circuits where its electrical ratings and the complete protection design are suitable.

0.5 A Rated Current

The exact 3NW60001 has a rated current of 0.5 A. Siemens' product data and the Siemens CAD/product record both confirm the 0.5 A rating.

The 0.5 A rating should be selected according to the protected circuit, conductor capacity, equipment requirements and the overall protection-coordination design.

500 V AC Rated Voltage

The 3NW60001 is rated for 500 V AC. Siemens' Industry Mall description identifies it as a 10 × 38 mm, 0.5 A, gG cylindrical fuse with Un AC: 500 V.

The actual system voltage should always be verified before selecting or replacing the fuse.

10 × 38 mm Fuse Size

The exact 3NW60001 uses a 10 × 38 mm cylindrical fuse format. This dimension is explicitly specified by Siemens.

The physical fuse size must match the corresponding fuse holder or fuse-disconnector arrangement.

For replacement applications, both the physical size and electrical ratings should be checked.

gG Operating Class

The 3NW60001 has a gG operating class. Siemens identifies the exact article as a gG cylindrical fuse link.

The gG category is intended for general-purpose protection against overload and short-circuit conditions in suitable electrical circuits.

The final fuse selection should still be based on the load characteristics and protection requirements of the installation.

Cylindrical Fuse for Selective Line Protection

Siemens describes the 3NW cylindrical fuse system as being designed for selective line protection. The exact 3NW60001 product record describes it as a cylindrical fuse within the SENTRON cylindrical fuse system.

This makes the product relevant for compatible electrical distribution and protection arrangements where coordinated fuse protection is required.

No Striker

The official Siemens technical data specifies that the 3NW60001 has no striker.

Therefore, this fuse does not include a striker mechanism for actuating an external indicator or mechanical switching arrangement.

Mounting Position

Siemens specifies the mounting position for the 3NW60001 as any position, preferably vertical.

Installation should also follow the recommendations of the selected fuse holder and the complete electrical assembly.

Power Dissipation

Siemens' technical data lists approximately 0.1 W power loss for the 3NW60001 under the stated conditions.

This parameter can be useful when evaluating heat generation in enclosed electrical panels, particularly where multiple fuse links are installed close together.

Compact Cylindrical Fuse Design

The 10 × 38 mm format provides a compact fuse solution for compatible electrical protection assemblies.

Siemens lists the product with an approximate net weight of 7 g in its technical data.

Its compact construction is useful for space-conscious electrical panels and distribution assemblies.

Suitable for Industrial Electrical Systems

The 3NW60001 can be considered for compatible applications such as:

• Industrial electrical panels

• Low-voltage distribution

• Selective line protection

• Feeder protection

• Electrical equipment protection

• Control-panel circuits

• Machinery protection

• Fuse replacement applications

Actual application should be based on system voltage, load current, prospective short-circuit current and the complete protection design.

Fuse Replacement Applications

The 3NW60001 can be used as a replacement where the existing fuse requires compatible:

• Rated current

• Rated voltage

• Fuse size

• Operating class

• Fuse-holder compatibility

A replacement fuse should not be selected solely because the current rating is the same. Physical dimensions and voltage rating must also match.

Compatible Fuse Holder Selection

Because the 3NW60001 is a 10 × 38 mm cylindrical fuse, the corresponding fuse holder must be suitable for this physical format and the applicable electrical rating.

Siemens places the 3NW60001 within its Cylindrical Fuse Links and Cylindrical Fuse Holders family.

The exact holder should be checked against the required fuse size and installation arrangement.

Standardized Siemens SENTRON Solution

The 3NW60001 is part of the Siemens SENTRON cylindrical fuse-link family. Siemens' current Industry Mall lists the corresponding market-facing article 3NW6001-1 as a cylindrical fuse link with the description 10 × 38 mm, 0.5 A, gG, 500 V AC.

This makes the article relevant for standardized cylindrical-fuse protection and replacement applications.

Active Product and Ordering Information

Siemens currently lists 3NW6001-1 as PLM PM300: Active Product. The Industry Mall shows a quantity unit of 1 piece, packaging quantity of 1, and a minimum order quantity of 10 pieces.

This distinction is useful for procurement because the fuse is identified as an individual article while the referenced commercial listing specifies a 10-piece minimum order quantity.

Suitable for Electrical Panel Builders and Industrial Buyers

The Siemens 3NW60001 is relevant for:

• Electrical panel builders

• Industrial buyers

• Maintenance departments

• Electrical contractors

• OEM equipment maintenance

• Electrical product dealers

• Replacement-part procurement

For SB Smart, the product is positioned around industrial electrical product supply and procurement, without claiming automation integration or automation-service work.

Key Features

• Siemens SENTRON 3NW cylindrical fuse link

• Article number 3NW60001

• Siemens market-facing number 3NW6001-1

• 0.5 A rated current

• 500 V AC rated voltage

• 10 × 38 mm fuse size

• gG operating class

• No striker

• Mounting position: any, preferably vertical

• Approx. 7 g net weight

• Approx. 0.1 W power loss

• Active Siemens product

• Quantity unit: 1 piece

• Minimum order quantity: 10 pieces

Benefits

• 0.5 A rating: Suitable for compatible low-current electrical circuits.

• 500 V AC rating: Suitable for compatible low-voltage AC systems.

• 10 × 38 mm format: Provides a compact cylindrical fuse solution.

• gG protection: Suitable for general-purpose overload and short-circuit protection.

• Selective line protection: Relevant for coordinated electrical protection applications.

• Compact construction: Useful for space-conscious panel designs.

• Low power loss: Approximately 0.1 W under the specified technical conditions.

• Siemens SENTRON design: Provides a standardized cylindrical fuse solution.

Why Choose Siemens 3NW60001?

The Siemens 3NW60001 is a 0.5 A, 500 V AC, 10 × 38 mm cylindrical fuse link with gG operating class, designed for compatible Siemens SENTRON cylindrical fuse systems. Siemens currently lists the corresponding 3NW6001-1 as an active product.

It is suitable for customers looking to buy or source Siemens cylindrical fuse links for industrial electrical distribution, panel maintenance and replacement requirements.

For SB Smart, this product is best presented as a Siemens industrial electrical protection component for supply and procurement across India.

Delivery Across India

SB Smart supplies Siemens industrial electrical products across Faridabad, Gurgaon/Gurugram, Delhi NCR, Haryana, Noida, Punjab, Mumbai and other major Indian cities.

Major delivery locations include:

• Faridabad

• Delhi

• Gurgaon/Gurugram

• Delhi NCR

• Noida

• Greater Noida

• Haryana

• Punjab

• Mumbai

• Pune

• Ahmedabad

• Bengaluru

• Hyderabad

• Chennai

• Kolkata

• Jaipur

• Chandigarh

• Lucknow

• Indore

• Surat

• Vadodara

• Nagpur

• Coimbatore

• And other major cities across India

Frequently Asked Questions

1. What is Siemens 3NW60001?

The 3NW60001 is a Siemens SENTRON cylindrical fuse link rated at 0.5 A, with a 10 × 38 mm size and 500 V AC rated voltage.

2. What is the operating class?

The operating class is gG.

3. What is the fuse size?

The exact fuse size is 10 × 38 mm.

4. What is the rated current?

The rated current is 0.5 A.

5. What is the rated voltage?

The rated operating voltage is 500 V AC.

6. Does it have a striker?

No. Siemens specifies no striker for the 3NW60001.

7. What is the approximate power loss?

Siemens lists approximately 0.1 W power loss under the specified conditions.

8. What is the recommended mounting position?

It can be installed in any position, preferably vertical.

9. What is the minimum order quantity?

The referenced Siemens Industry Mall listing specifies a minimum order quantity of 10 pieces, with a quantity unit of one piece.

10. Where can I buy Siemens 3NW60001 in India?

SB Smart supplies Siemens industrial electrical products and cylindrical fuse links in India for industrial buyers, panel builders, maintenance requirements and replacement procurement.