The Siemens 3NWTIA6 is a low-voltage HRC fuse (BS) from the Siemens 3NW series, designed for overload and short-circuit protection in compatible low-voltage electrical systems. The exact article is rated at 6 A, 415 V AC, with an 80 kA breaking capacity, Size A2, GG operating class, and an offset tag configuration.
For SB Smart, this product is best positioned as a Siemens industrial electrical protection component for supply, procurement, replacement and maintenance requirements.
The 3NWTIA6 belongs to the Siemens 3NW BS HRC fuse range, designed for low-voltage circuit protection. Siemens' 3NW documentation specifies the range for 415 V AC / 240 V DC applications with an 80 kA AC breaking capacity.
The fuse is designed to interrupt overload and short-circuit currents within its specified electrical ratings, making it suitable for compatible industrial and electrical distribution applications.
The exact 3NWTIA6 has a rated current of 6 A.
The 6 A rating should be selected according to the protected circuit, conductor capacity, equipment rating and overall protection-coordination requirements.
The fuse should only be replaced with a device having compatible electrical and mechanical specifications.
The 3NWTIA6 is rated for 415 V AC. The Siemens 3NW BS fuse family is specified for 415 V AC / 240 V DC applications.
The actual system voltage should always be verified before selecting or replacing the fuse.
The exact 3NWTIA6 has an 80 kA breaking capacity.
A high breaking capacity allows the HRC fuse to interrupt high prospective short-circuit currents within its specified operating conditions.
This is useful in industrial and electrical distribution applications where available fault current can be significant.
The 3NWTIA6 is identified as Size A2. Siemens documentation groups the A2 offset-tag variants at 6 A, 10 A, 16 A, 20 A, 25 A and 32 A.
The physical fuse size must match the corresponding fuse base, holder or switch-fuse arrangement.
The 3NWTIA6 uses an offset tag configuration. Siemens' 3NW documentation specifically lists 3NWTIA6 under the offset-tag section.
The tag position is an important mechanical-selection parameter because the fuse must fit the corresponding holder or mounting arrangement.
The exact 3NWTIA6 is specified as an operating class GG fuse.
GG fuses are intended for general-purpose protection against overload and short-circuit conditions in compatible electrical circuits.
The correct fuse should still be selected according to the load, equipment rating, fault level and protection-coordination requirements.
HRC means High Rupturing Capacity. An HRC fuse is designed to interrupt high fault currents safely within its specified breaking capacity.
The 3NWTIA6 combines:
6 A rated current
415 V AC rated voltage
80 kA breaking capacity
Size A2
Offset tag
GG operating class
These specifications make it suitable for compatible low-voltage industrial protection applications.
The 3NWTIA6 is part of the smaller-current A2 offset-tag section of the Siemens 3NW range. This series also includes 3NWTIA10, 3NWTIA16, 3NWTIA20, 3NWTIA25 and 3NWTIA32.
This allows customers to select different current ratings while retaining the applicable physical fuse format.
The 3NWTIA6 can be considered for compatible applications such as:
Industrial electrical panels
Feeder protection
Low-voltage distribution
Electrical equipment protection
Machinery protection
Control-panel circuits
Compatible BS HRC fuse assemblies
Replacement of matching HRC fuse links
Actual application should be based on system voltage, load current, prospective short-circuit current and protection-coordination requirements.
The 3NWTIA6 can be used as a replacement where the existing fuse requires compatible:
Rated current
Rated voltage
Breaking capacity
Fuse size
Tag configuration
Operating class
A replacement fuse should not be selected solely because the ampere rating is the same. Mechanical compatibility with the fuse holder is equally important.
The 3NWTIA6 is part of the Siemens 3NW TIA offset-tag series. Siemens documentation lists the A2 variants from 6 A to 32 A, providing a standardized family for different circuit current requirements.
The Siemens 3NWTIA6 is relevant for:
Electrical panel builders
Industrial buyers
Maintenance departments
Electrical contractors
OEM equipment maintenance
Electrical product dealers
Replacement-part procurement
For SB Smart, the product is positioned around industrial electrical product supply and procurement, without claiming automation integration or automation-service work.
Siemens 3NW series HRC fuse
Article number 3NWTIA6
6 A rated current
415 V AC rated voltage
80 kA breaking capacity
Size A2
Offset tag
GG operating class
BS-type low-voltage HRC fuse
Designed for overload and short-circuit protection
Suitable for compatible fuse holders and fuse systems
Suitable for industrial electrical applications
Standard package quantity: 20 pieces according to Siemens' published 3NW pricing documentation.
6 A rating: Suitable for compatible low-current electrical circuits.
80 kA breaking capacity: Provides high fault-current interruption capability within the specified rating.
415 V AC rating: Suitable for compatible low-voltage AC systems.
GG operating class: Provides general-purpose overload and short-circuit protection.
Offset tag: Supports compatibility with the corresponding offset-tag mounting arrangement.
A2 size: Suitable where the same physical fuse format is required.
HRC construction: Designed for high fault-current interruption within its rated capacity.
Standardized Siemens fuse: Suitable for compatible industrial electrical protection systems.
20-piece standard package: Convenient for stock and maintenance procurement.
The Siemens 3NWTIA6 is a 6 A, 415 V AC BS-type HRC fuse with 80 kA breaking capacity, Size A2, GG operating class and offset tag.
It is a suitable choice for customers looking to buy or source Siemens HRC fuse links for industrial electrical protection, panel maintenance and replacement requirements.
For SB Smart, this product is best presented as a Siemens industrial electrical protection component for supply and procurement across India.
SB Smart supplies Siemens industrial electrical products across Faridabad, Gurgaon/Gurugram, Delhi NCR, Haryana, Noida, Punjab, Mumbai and other major Indian cities.
Major delivery locations include:
Faridabad
Delhi
Gurgaon/Gurugram
Delhi NCR
Noida
Greater Noida
Haryana
Punjab
Mumbai
Pune
Ahmedabad
Bengaluru
Hyderabad
Chennai
Kolkata
Jaipur
Chandigarh
Lucknow
Indore
Surat
Vadodara
Nagpur
Coimbatore
And other major cities across India
The 3NWTIA6 is a Siemens low-voltage HRC fuse (BS) rated at 6 A and 415 V AC.
The breaking capacity is 80 kA.
The exact fuse is Size A2.
The 3NWTIA6 uses an offset tag.
The operating class is GG.
It is rated at 415 V AC.
Yes. The 3NWTIA6 is a low-voltage HRC fuse in the Siemens 3NW BS range.
Siemens' published 3NW pricing documentation lists a standard package quantity of 20 pieces.
Only when the voltage, breaking capacity, fuse size, tag configuration, operating class and fuse-holder compatibility are also suitable.
SB Smart supplies Siemens industrial electrical products and HRC fuse links in India for industrial buyers, panel builders, maintenance requirements and replacement procurement.
| Specification | Details |
|---|---|
| Product Name | Offset Tag |
| Manufacturer | Siemens |
| Product Series | 3NW HRC Fuse Accessories |
| Model Number | 3NWTIA6 |
| Product Type | Fuse Connection Accessory |
| Compatible Fuse Series | Siemens 3NW HRC Fuses |
| Fuse Standard | BS Type HRC Fuses |
| Configuration | Offset Tag |
| Function | Fuse Mounting & Electrical Connection |
| Application | Low Voltage Fuse Protection Systems |
| Industrial Application | Yes |
| Commercial Application | Yes |
| Utility Application | Yes |
| Construction | Heavy-Duty Industrial Grade |
| Brand | Siemens |
| Condition | New & Genuine Product |
No reviews yet.