The Siemens 3NWTSF200 is a low-voltage HRC fuse (BS) from the Siemens 3NW series, designed for overload and short-circuit protection in compatible low-voltage electrical systems. The exact article is rated at 200 A, 415 V AC, with an 80 kA breaking capacity, Size B3, GG operating class, and a central tag configuration.
For SB Smart, this product is best positioned as a Siemens industrial electrical protection component for supply, procurement, replacement and maintenance requirements.
The 3NWTSF200 belongs to the Siemens 3NW BS HRC fuse range, developed for low-voltage circuit protection applications. The Siemens 3NW family covers a broad range of current ratings and uses different tag and physical-size configurations for compatible fuse holders. Siemens documentation lists 415 V AC / 240 V DC and an 80 kA AC breaking capacity for the 3NW range.
The fuse is intended to interrupt overload and short-circuit currents within its specified electrical ratings.
The exact 3NWTSF200 has a rated current of 200 A.
The 200 A rating should be selected according to the protected circuit, conductor capacity, equipment rating and the overall protection-coordination requirements.
The fuse should only be replaced with a device having compatible electrical and mechanical characteristics.
The 3NWTSF200 is rated for 415 V AC. Current product listings identify the exact article with a 415 V rated voltage.
The system voltage should always be verified before selecting or replacing the fuse.
The exact fuse provides an 80 kA breaking capacity.
This high breaking capacity enables the HRC fuse to interrupt high prospective fault currents within its specified operating conditions.
This is particularly relevant for industrial and distribution systems where available short-circuit current can be significant.
The 3NWTSF200 is identified as Size B3 in product documentation and listings.
The physical fuse size must match the associated fuse base, holder or switch-fuse arrangement.
When replacing an existing fuse, both the electrical ratings and physical dimensions should be checked.
The 3NWTSF200 uses a central tag configuration. Siemens price-list documentation places the 200 A 3NWTSF200 under the central-tag section.
The tag configuration is an important mechanical-selection parameter because the fuse must fit the corresponding fuse holder or mounting arrangement.
The 3NWTSF200 is identified as a GG operating-class fuse.
GG fuses are intended for general-purpose protection against overload and short-circuit conditions in compatible electrical circuits.
The correct fuse should still be selected according to the load, equipment rating, fault level and protection coordination requirements.
HRC means High Rupturing Capacity. An HRC fuse is designed to interrupt high fault currents safely within its specified breaking capacity.
The 3NWTSF200 combines:
200 A rated current
415 V AC rated voltage
80 kA breaking capacity
Size B3
Central tag
GG operating class
These specifications make it suitable for compatible low-voltage industrial protection applications.
The 3NWTSF200 can be considered for compatible applications such as:
Industrial distribution panels
Feeder circuits
Electrical distribution systems
Industrial power panels
Machinery protection
Commercial electrical installations
Industrial replacement applications
Compatible BS HRC fuse assemblies
Actual application should be based on system voltage, load current, prospective short-circuit current and the complete protection design.
The 3NWTSF200 can be used as a replacement where the existing fuse requires compatible:
Rated current
Rated voltage
Breaking capacity
Fuse size
Tag configuration
Operating class
A replacement fuse should not be selected solely because the ampere rating is the same. Mechanical compatibility with the fuse holder is equally important.
The 3NWTSF200 is part of the Siemens 3NW series, which includes several central-tag ratings such as 125 A, 160 A, 200 A, 250 A and 315 A. Siemens' published product documentation identifies 3NWTSF125, 3NWTSF160 and 3NWTSF200, followed by higher-current central-tag variants.
This makes the 3NW range suitable for standardized fuse selection across different industrial circuits.
The Siemens 3NWTSF200 is relevant for:
Electrical panel builders
Industrial buyers
Maintenance departments
Electrical contractors
OEM equipment maintenance
Electrical product dealers
Replacement-part procurement
For SB Smart, the product is positioned around industrial electrical product supply and procurement, without claiming automation integration or automation-service work.
Siemens 3NW series HRC fuse
Article number 3NWTSF200
200 A rated current
415 V AC rated voltage
80 kA breaking capacity
Size B3
Central tag
GG operating class
BS-type low-voltage HRC fuse
Designed for overload and short-circuit protection
Suitable for compatible fuse holders and fuse systems
Suitable for industrial electrical applications
Standard packing listed as 5 pieces in Siemens price-list documentation.
200 A rating: Suitable for compatible higher-current industrial circuits.
80 kA breaking capacity: Provides high fault-current interruption capability within the specified rating.
415 V AC rating: Suitable for compatible low-voltage AC systems.
GG operating class: Provides general-purpose overload and short-circuit protection.
Central tag: Supports compatibility with the corresponding central-tag mounting arrangement.
B3 size: Suitable where the same physical fuse format is required.
HRC construction: Designed for high fault-current interruption within its rated capacity.
Siemens product: Provides a standardized industrial fuse solution.
The Siemens 3NWTSF200 is a 200 A, 415 V AC BS-type HRC fuse with 80 kA breaking capacity, Size B3, GG operating class and central tag.
It is a suitable choice for customers looking to buy or source Siemens HRC fuse links for industrial electrical distribution, feeder protection, panel maintenance and replacement requirements.
For SB Smart, this product is best presented as a Siemens industrial electrical protection component for supply and procurement across India.
SB Smart supplies Siemens industrial electrical products across Faridabad, Gurgaon/Gurugram, Delhi NCR, Haryana, Noida, Punjab, Mumbai and other major Indian cities.
Major delivery locations include:
Faridabad
Delhi
Gurgaon/Gurugram
Delhi NCR
Noida
Greater Noida
Haryana
Punjab
Mumbai
Pune
Ahmedabad
Bengaluru
Hyderabad
Chennai
Kolkata
Jaipur
Chandigarh
Lucknow
Indore
Surat
Vadodara
Nagpur
Coimbatore
And other major cities across India
The 3NWTSF200 is a Siemens low-voltage HRC fuse (BS) rated at 200 A and 415 V AC.
The breaking capacity is 80 kA.
The exact fuse is Size B3.
The 3NWTSF200 uses a central tag. Siemens documentation lists it in the central-tag section.
The operating class is GG.
It is rated at 415 V AC.
Yes. The 3NWTSF200 is a low-voltage HRC fuse in the Siemens 3NW BS range.
Siemens price-list documentation lists a standard package quantity of 5 pieces for the 3NWTSF200.
Only when the voltage, breaking capacity, fuse size, tag configuration, operating class and fuse-holder compatibility are also suitable.
SB Smart supplies Siemens industrial electrical products and HRC fuse links in India for industrial buyers, panel builders, maintenance requirements and replacement procurement. accessories.
| Specification | Details |
|---|---|
| Product Name | Central Tag |
| Manufacturer | Siemens |
| Product Series | 3NW HRC Fuse Accessories |
| Model Number | 3NWTSF200 |
| Product Type | Fuse Connection Accessory |
| Compatible Fuse Series | Siemens 3NW HRC Fuses |
| Fuse Standard | BS Type HRC Fuses |
| Configuration | Central Tag |
| Function | Fuse Mounting & Electrical Connection |
| Application | Low Voltage Fuse Protection Systems |
| Industrial Application | Yes |
| Commercial Application | Yes |
| Utility Application | Yes |
| Construction | Heavy-Duty Industrial Grade |
| Brand | Siemens |
| Condition | New & Genuine Product |
No reviews yet.