LAPP ÖLFLEX® UNIPLUS 1X10 GN – 4520125U100 is a high-quality 10 sq. mm single-core electrical cable designed for reliable electrical wiring, control panel connections, distribution systems and suitable fixed-installation applications. Manufactured by LAPP, this cable belongs to the ÖLFLEX® UNIPLUS series, which is designed for professional electrical and industrial wiring applications.
The 1X10 GN designation represents a single-core cable with a 10 mm² conductor cross-section, while GN indicates the green colour of the insulation. The product is identified by LAPP article number 4520125U100, making it easy for electrical contractors, panel builders, OEMs, maintenance teams and industrial procurement professionals to specify the correct cable.
The cable features a fine-wire bare copper conductor with Class 5 construction according to IEC 60228. The fine-wire design provides good flexibility, making the cable easier to handle, route and terminate during electrical installation. This is particularly useful in electrical control panels, switchgear cabinets, distribution boxes and other installations where individual conductors need to be routed through limited spaces.
The copper conductor provides good electrical conductivity, while the PVC insulation provides electrical separation and protection around the conductor. The combination of a flexible copper conductor and PVC insulation makes this cable a practical solution for a wide range of compatible electrical wiring applications.
The ÖLFLEX® UNIPLUS 1X10 GN is designed for a 1.1 kV AC RMS nominal voltage and a 3 kV test voltage, making it suitable for compatible low-voltage electrical installations. The cable also incorporates flame-retardant characteristics, making it suitable for applications where flame-retardant cable performance is required.
The 10 mm² conductor cross-section makes this cable suitable for electrical installations requiring a medium-sized single-core conductor.
The conductor is made from bare copper and uses a fine-wire Class 5 construction. This construction provides a useful combination of electrical conductivity and flexibility.
Compared with rigid conductor constructions, the fine-wire design can make installation easier, particularly when the cable has to be:
The actual current-carrying capacity of the cable depends on the installation method, ambient temperature, grouping of conductors and other applicable electrical conditions. Therefore, the appropriate cable size should always be selected according to the complete installation requirements.
The conductor is protected by PVC insulation, which provides electrical separation between the copper conductor and surrounding components.
PVC is widely used as an insulation material in industrial electrical cables because it offers a practical combination of electrical insulation, durability and ease of installation.
The insulation helps protect the conductor against accidental contact with other conductive parts and supports reliable electrical performance under the cable's specified operating conditions.
The green insulation also makes the cable easy to visually identify within an electrical wiring system.
The GN designation in ÖLFLEX® UNIPLUS 1X10 GN indicates the green colour of the cable.
The green insulation provides clear visual identification and can be used according to the colour-coding practices applicable to the particular electrical installation.
Using correctly identified conductors helps installers and maintenance personnel distinguish individual cables during electrical assembly, inspection and servicing.
The colour designation should always be applied according to the applicable electrical standards and the wiring scheme of the installation.
The LAPP ÖLFLEX® UNIPLUS 1X10 GN is designed for a 1.1 kV AC RMS nominal voltage.
This makes the cable suitable for compatible low-voltage electrical wiring and distribution applications where the voltage rating of the cable matches the requirements of the electrical system.
The cable also has a specified 3 kV test voltage, which relates to electrical insulation testing.
When selecting this cable for an installation, the voltage rating should be considered together with current requirements, installation conditions, temperature, environmental exposure and applicable electrical regulations.
The ÖLFLEX® UNIPLUS cable range is designed with flame-retardant characteristics.
Flame-retardant cable construction is an important feature for many industrial electrical installations because it is intended to help limit flame propagation along the cable under specified test conditions.
This characteristic makes the cable suitable for consideration in applications such as:
The cable should always be installed according to the manufacturer's specified conditions and relevant electrical safety requirements.
The ÖLFLEX® UNIPLUS 1X10 GN is primarily intended for fixed electrical installation applications.
Its fine-wire construction provides flexibility during installation, allowing installers to route the cable conveniently through suitable ducts, tubes and protected installation paths.
For fixed installation, the recommended bending radius should be maintained during routing. Avoiding excessive bending and mechanical stress helps maintain the integrity of the cable and its insulation.
The LAPP ÖLFLEX® UNIPLUS 1X10 GN – 4520125U100 can be used in a variety of suitable industrial and commercial electrical applications.
The cable can be used for appropriate internal wiring inside electrical control panels where a 10 mm² single-core conductor is required.
Its flexible conductor makes it convenient to route between terminals, protective devices and other electrical components.
The cable can be used for suitable electrical connections within switchgear cabinets and electrical distribution assemblies.
The cable can be considered for compatible wiring and connections inside electrical distribution boxes and enclosures.
It can be used for fixed electrical wiring in compatible industrial machinery and equipment where its voltage, conductor size and environmental specifications meet the application requirements.
The fine-wire construction makes the cable convenient to route through suitable wiring ducts, tubes and protected installation paths.
The cable can be considered for suitable fixed wiring applications in industrial and commercial electrical systems.
The cable features a 1 × 10 mm² configuration, making it suitable for electrical applications requiring a 10 mm² single-core conductor.
The bare copper conductor provides good electrical conductivity while the fine-wire construction offers flexibility during installation.
The Class 5 construction makes the conductor flexible and easier to handle during routing and termination.
PVC insulation provides electrical separation and protection around the copper conductor.
The GN version features green insulation for clear visual identification.
The cable is suitable for compatible electrical installations within its specified voltage rating.
The cable has a specified test voltage for electrical insulation testing.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for applicable installation requirements.
The fine-wire conductor makes the cable convenient to route and handle during installation.
The cable can be considered for suitable control panels, switchgear, distribution systems and industrial electrical installations.
LAPP ÖLFLEX® UNIPLUS 1X10 GN can be considered for:
| Specification | Details |
|---|---|
| Brand | LAPP |
| Product Series | ÖLFLEX® UNIPLUS |
| Product Name | ÖLFLEX® UNIPLUS 1X10 GN |
| Article Number | 4520125U100 |
| Product Type | Single Core Cable |
| Cable Configuration | 1 × 10 mm² |
| Number of Cores | 1 Core |
| Conductor Cross-Section | 10 mm² |
| Conductor Material | Bare Copper |
| Conductor Construction | Fine-Wire |
| Conductor Class | IEC 60228 Class 5 |
| Insulation Material | PVC |
| Cable Colour | Green |
| Colour Code | GN |
| Nominal Voltage | 1.1 kV AC RMS |
| Test Voltage | 3 kV |
| Cable Construction | Single Core |
| Cable Shape | Round |
| Application | Fixed Installation |
| Flame Retardant | Yes |
| Packaging | Ring |
| Manufacturer | LAPP |
| Series | ÖLFLEX® UNIPLUS |
| Article / SKU | 4520125U100 |
| Suitable Applications | Control Panels, Switchgear, Distribution & Industrial Wiring |
No reviews yet.