LAPP ÖLFLEX® UNIPLUS 1X10 YE – 4520115U100 is a professional 10 sq. mm single-core electrical cable designed for reliable electrical wiring, control-panel connections, equipment wiring and suitable fixed electrical installations. Manufactured by LAPP, this cable belongs to the ÖLFLEX® UNIPLUS series and is designed for industrial and commercial electrical applications where reliable conductivity, flexible handling and effective insulation are required.
The product features a single 10 mm² conductor and carries the LAPP article number 4520115U100. The YE designation indicates the yellow colour of the cable insulation. Its single-core configuration allows the conductor to be routed individually between terminals, electrical components, switchgear and other equipment.
The cable uses a fine-wire bare copper conductor with Class 5 construction, providing a useful combination of electrical conductivity and flexibility. The fine-wire design makes the cable easier to handle, bend and route during installation, especially in electrical panels and cabinets where conductors need to be arranged neatly and efficiently.
The copper conductor is protected by PVC insulation, which provides electrical separation between the conductor and surrounding components. PVC insulation also helps protect the conductor during normal handling, routing and installation.
The ÖLFLEX® UNIPLUS 1X10 YE is designed for a 1.1 kV AC RMS nominal voltage and a 3 kV test voltage, making it suitable for compatible low-voltage electrical installations. The ÖLFLEX® UNIPLUS range also incorporates flame-retardant characteristics, making it suitable for applications where flame-retardant cable construction is required.
The 10 mm² conductor cross-section makes this cable suitable for electrical applications where a 10 mm² single-core conductor is required.
The conductor is made from bare copper and features a fine-wire Class 5 construction. This construction provides flexibility and makes the cable easier to handle during installation.
The flexible conductor can be useful when routing cables through:
The actual current-carrying capacity should always be determined according to the installation method, ambient temperature, conductor grouping, cable arrangement and applicable electrical standards.
The LAPP ÖLFLEX® UNIPLUS 1X10 YE uses PVC insulation around the copper conductor.
The insulation provides electrical separation between the conductor and surrounding components and helps protect the conductor during normal handling and installation.
PVC is widely used in industrial electrical cables because it offers a practical combination of electrical insulation, durability and flexibility.
The yellow insulation also makes the cable easy to distinguish from other individual conductors within an electrical installation.
The YE designation represents the yellow colour of the cable.
The yellow insulation provides clear visual identification during installation, inspection and maintenance. This can be useful in electrical panels and wiring systems where individual conductors need to be easily distinguished.
The conductor colour should always be used according to the applicable electrical standards and the identification system adopted for the particular electrical installation.
The LAPP ÖLFLEX® UNIPLUS 1X10 YE has a 1.1 kV AC RMS nominal voltage rating.
This makes the cable suitable for compatible low-voltage electrical wiring and power distribution applications where the voltage requirements of the system match the cable specifications.
The cable also has a 3 kV test voltage, supporting electrical insulation testing and quality verification.
When selecting the cable for an actual installation, the voltage rating should be considered together with current requirements, installation method, ambient temperature, conductor grouping and applicable electrical regulations.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable electrical applications.
Flame-retardant cable construction is an important consideration in electrical installations where limiting flame propagation is required under specified test conditions.
This feature can be useful in applications such as:
The cable should be installed according to the manufacturer's recommended installation conditions and applicable electrical safety requirements.
The single-core construction allows the conductor to be installed individually within an electrical system.
The fine-wire Class 5 conductor provides flexibility, making the cable easier to:
Maintaining the recommended bending radius during installation helps prevent unnecessary mechanical stress on the cable.
The LAPP ÖLFLEX® UNIPLUS 1X10 YE – 4520115U100 can be considered for a variety of electrical and industrial applications.
Suitable for compatible internal wiring inside control panels where a 10 mm² single-core conductor is required.
The flexible conductor construction makes it convenient for routing individual conductors inside electrical cabinets.
Can be used for suitable electrical connections within switchgear assemblies and electrical distribution systems.
Suitable for compatible power and electrical distribution wiring where the conductor size and cable ratings meet the system requirements.
Can be used for appropriate electrical connections inside distribution boxes and electrical enclosures.
Can be considered for fixed electrical wiring in compatible industrial machinery and equipment.
The flexible fine-wire construction allows convenient routing through suitable wiring ducts, tubes and protected installation pathways.
The cable features a 1 × 10 mm² configuration, making it suitable for electrical applications requiring a 10 mm² single-core conductor.
The copper conductor provides good electrical conductivity while the fine-wire construction offers flexibility during installation.
The Class 5 construction makes the conductor flexible and convenient to handle during routing and termination.
PVC insulation provides electrical separation and protection around the copper conductor.
The YE version features yellow insulation for clear visual identification.
Suitable for compatible electrical installations within the specified voltage rating.
Provides the specified electrical test voltage for insulation testing.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable applications.
The fine-wire construction makes the cable easier to bend, route and terminate.
Suitable for electrical contractors, panel builders, OEMs, system integrators and maintenance teams requiring a professional single-core cable for compatible applications.
The LAPP ÖLFLEX® UNIPLUS 1X10 YE can be used in suitable:
| Specification | Details |
|---|---|
| Brand | LAPP |
| Product Series | ÖLFLEX® UNIPLUS |
| Product Name | ÖLFLEX® UNIPLUS 1X10 YE |
| Article Number | 4520115U100 |
| SKU | 4520115U100 |
| Product Type | Single Core Cable |
| Cable Configuration | 1 × 10 mm² |
| Number of Cores | 1 Core |
| Conductor Cross-Section | 10 mm² |
| Conductor Material | Bare Copper |
| Conductor Construction | Fine-Wire |
| Conductor Class | IEC 60228 Class 5 |
| Insulation Material | PVC |
| Cable Colour | Yellow |
| Colour Code | YE |
| Nominal Voltage | 1.1 kV AC RMS |
| Test Voltage | 3 kV |
| Cable Construction | Single Core |
| Cable Shape | Round |
| Application | Fixed Installation |
| Flame Retardant | Yes |
| Packaging | Ring |
| Manufacturer | LAPP |
| Series | ÖLFLEX® UNIPLUS |
| Article / SKU | 4520115U100 |
| Suitable Applications | Control Panels, Cabinets, Switchgear, Distribution & Industrial Wiring |
No reviews yet.