LAPP ÖLFLEX® UNIPLUS 1X1.5 GN – 4520121U100 is a high-quality 1.5 sq. mm single-core electrical cable designed for reliable electrical wiring, control-panel connections, equipment wiring and suitable fixed-installation applications. Manufactured by LAPP, this cable belongs to the ÖLFLEX® UNIPLUS series and is designed for professional electrical and industrial wiring applications where dependable conductivity, flexible handling and reliable insulation are required.
The product features a single 1.5 mm² conductor and carries the LAPP article number 4520121U100. The GN designation indicates the green colour of the cable. Its single-core construction allows the conductor to be routed individually within electrical panels, control cabinets, electrical equipment and other suitable wiring systems.
The cable uses a fine-wire bare copper conductor with Class 5 construction, providing a combination of good electrical conductivity and flexibility. The flexible conductor makes the cable convenient to handle, route and terminate, particularly in applications where electrical conductors need to be neatly arranged inside panels or cabinets.
The conductor is protected by PVC insulation, which provides electrical separation and helps protect the copper conductor during normal installation and operation. The combination of a copper conductor and PVC insulation makes this cable a practical solution for various compatible electrical wiring applications.
The ÖLFLEX® UNIPLUS 1X1.5 GN is designed for a 1.1 kV AC RMS nominal voltage and a 3 kV test voltage, making it suitable for compatible low-voltage electrical installations. The cable range also incorporates flame-retardant characteristics, supporting its use in applications where this cable performance is required.
The 1.5 mm² conductor cross-section makes this cable suitable for a wide range of electrical wiring applications requiring a 1.5 mm² single-core conductor.
The conductor is manufactured from bare copper and uses a fine-wire Class 5 construction. This design provides flexibility, making the cable easier to bend and route during installation.
The flexible conductor can be particularly useful when wiring needs to be routed through:
The actual current-carrying capacity should always be determined according to the installation method, ambient temperature, conductor grouping and applicable electrical standards.
The LAPP ÖLFLEX® UNIPLUS 1X1.5 GN uses PVC insulation around the copper conductor.
The insulation provides electrical separation between the conductor and surrounding electrical components. It also helps protect the conductor during handling, routing and normal operation.
PVC is commonly used in industrial electrical cables because it provides a practical combination of electrical insulation, durability and flexibility.
The green insulation also allows easy visual identification of the cable within an organized electrical wiring system.
The GN designation represents the green colour of the cable.
The green insulation provides easy visual identification during installation, inspection and maintenance. This can be useful when several individual conductors are routed through the same control panel or electrical system.
The conductor colour should always be used according to the applicable electrical standards and the identification scheme of the particular installation.
The LAPP ÖLFLEX® UNIPLUS 1X1.5 GN has a 1.1 kV AC RMS nominal voltage rating.
This makes the cable suitable for compatible low-voltage electrical applications where its voltage rating matches the requirements of the electrical system.
The cable is also specified with a 3 kV test voltage, supporting electrical insulation testing and quality verification.
When selecting this cable for an actual installation, voltage should be considered together with current requirements, installation method, ambient temperature, conductor grouping and other applicable electrical requirements.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable electrical applications.
Flame-retardant cable construction can be an important consideration in electrical installations where limiting flame propagation is required under specified test conditions.
This makes the cable suitable for consideration in applications such as:
The cable should always be installed according to the recommended installation conditions and applicable electrical safety requirements.
The single-core construction allows the conductor to be installed separately within an electrical system.
The fine-wire Class 5 construction provides flexibility, making it easier to route and terminate the cable during installation.
This can be beneficial for:
Maintaining the recommended bending radius during installation helps avoid unnecessary mechanical stress on the cable.
The LAPP ÖLFLEX® UNIPLUS 1X1.5 GN – 4520121U100 can be considered for a variety of electrical and industrial applications.
The cable can be used for suitable internal wiring inside electrical control panels where a 1.5 mm² single-core conductor is required.
Its flexible construction makes it convenient for routing individual conductors inside control cabinets and electrical enclosures.
The cable can be considered for compatible electrical connections within switchgear assemblies.
It can be used for suitable wiring and electrical connections inside distribution boxes.
The cable can be considered for electrical connections in compatible industrial equipment and machinery.
The flexible conductor construction makes the cable convenient to route through suitable wiring ducts, tubes and protected installation paths.
The cable features a 1 × 1.5 mm² configuration, making it suitable for electrical applications requiring a 1.5 mm² single-core conductor.
The copper conductor provides good electrical conductivity while the fine-wire construction offers flexibility during installation.
The Class 5 construction makes the conductor flexible and convenient to handle during routing and termination.
PVC insulation provides electrical separation and protection around the copper conductor.
The GN version features green insulation for easy visual identification.
Suitable for compatible electrical installations within the specified voltage rating.
Provides the specified electrical test voltage for insulation testing.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable applications.
The fine-wire construction allows easier bending, routing and termination.
Suitable for electrical contractors, panel builders, OEMs, maintenance teams and industrial electrical applications where its specifications match the installation requirements.
| Specification | Details |
|---|---|
| Brand | LAPP |
| Product Series | ÖLFLEX® UNIPLUS |
| Product Name | ÖLFLEX® UNIPLUS 1X1.5 GN |
| Article Number | 4520121U100 |
| SKU | 4520121U100 |
| Product Type | Single Core Cable |
| Cable Configuration | 1 × 1.5 mm² |
| Number of Cores | 1 Core |
| Conductor Cross-Section | 1.5 mm² |
| Conductor Material | Bare Copper |
| Conductor Construction | Fine-Wire |
| Conductor Class | IEC 60228 Class 5 |
| Insulation Material | PVC |
| Cable Colour | Green |
| Colour Code | GN |
| Nominal Voltage | 1.1 kV AC RMS |
| Test Voltage | 3 kV |
| Cable Construction | Single Core |
| Cable Shape | Round |
| Application | Fixed Installation |
| Flame Retardant | Yes |
| Packaging | Ring |
| Manufacturer | LAPP |
| Series | ÖLFLEX® UNIPLUS |
| Article / SKU | 4520121U100 |
| Suitable Applications | Control Panels, Cabinets, Switchgear, Distribution & Industrial Wiring |
No reviews yet.