LAPP ÖLFLEX® UNIPLUS 1X16 GN – 4520126U100 is a professional 16 sq. mm single-core electrical cable designed for reliable electrical wiring, control-panel connections and suitable fixed-installation applications. Manufactured by LAPP, this cable is part of the ÖLFLEX® UNIPLUS range and is designed for electrical installations that require a combination of reliable conductivity, flexible handling, durable PVC insulation and flame-retardant performance.
The product has a 1 × 16 mm² single-core configuration and is identified by LAPP article number 4520126U100. The GN designation represents the green colour of the cable. LAPP's product listing identifies this article as a 16 mm² green cable supplied in ring packaging.
The cable uses a fine-wire bare copper conductor manufactured according to IEC 60228 Class 5. This type of conductor provides good electrical conductivity while also offering the flexibility needed for easier handling, routing and termination during installation.
Its flexible construction makes the cable particularly useful for applications involving electrical panels, switchgear cabinets, distribution boxes, wiring ducts and other protected installation environments.
The 16 mm² copper conductor provides a suitable conductor cross-section for a wide range of electrical wiring applications.
The conductor is made from bare copper and uses a fine-wire Class 5 construction. Compared with rigid conductor constructions, fine-wire conductors are easier to bend and route, which can be useful when working inside electrical cabinets or around electrical components.
This flexibility helps installers position the cable neatly and efficiently during panel wiring and electrical assembly.
The actual permissible current-carrying capacity should always be determined according to the installation method, ambient temperature, grouping conditions, conductor arrangement and applicable electrical standards.
The conductor is protected by PVC insulation, which provides electrical separation between the copper conductor and surrounding components.
PVC is commonly used in industrial electrical cables because it offers a practical combination of insulation performance, durability and ease of handling.
The insulation helps protect the conductor from accidental contact with other conductive components and supports reliable electrical performance under the cable's specified operating conditions.
For this ÖLFLEX® UNIPLUS family, LAPP specifies a PVC-insulated single-core construction with a nominal voltage of 1.1 kV AC.
The LAPP ÖLFLEX® UNIPLUS 1X16 GN is designed for a 1.1 kV AC nominal voltage rating, making it suitable for compatible low-voltage electrical installations.
The cable is also specified with a 3 kV test voltage, providing the required electrical insulation test capability for the product.
This makes the cable suitable for a range of electrical wiring and distribution applications where the voltage and other installation conditions correspond to the cable's specifications.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics. Flame-retardant cable construction is useful in electrical installations where limiting flame propagation is an important consideration.
This characteristic makes the cable suitable for consideration in environments such as:
The cable should always be installed according to the applicable electrical regulations and the manufacturer's installation recommendations.
The GN designation indicates the green colour of this cable.
The single-colour green insulation provides easy visual identification and allows the cable to be distinguished from other conductors within an electrical installation.
This can be particularly useful in organized panel wiring and electrical distribution systems where different conductor colours are used for identification purposes.
The colour designation should always be used in accordance with the applicable electrical installation standards and the wiring scheme of the particular project.
The ÖLFLEX® UNIPLUS 1X16 GN is primarily designed for fixed installation applications. Its fine-wire construction provides convenient handling during installation, while the cable should be routed according to the manufacturer's specified bending radius.
For the 16 mm² green variant, published product data specifies a minimum bending radius of 6 × the outer diameter for fixed installation. The listed temperature range for fixed installation is approximately -40°C to +80°C.
These values should be considered during installation to avoid excessive mechanical stress and ensure the cable remains within its specified operating conditions.
The LAPP ÖLFLEX® UNIPLUS 1X16 GN – 4520126U100 can be considered for a variety of industrial and commercial electrical wiring applications.
The cable can be used for suitable internal wiring within electrical control panels where a 16 mm² single-core conductor is required.
Its flexible conductor construction allows easier routing between terminals, circuit protection devices and other panel components.
The cable is suitable for compatible wiring applications inside switchgear cabinets and electrical distribution assemblies.
It can be used for suitable electrical connections inside distribution boxes and electrical enclosures.
The cable can be considered for fixed wiring in compatible industrial machinery and electrical equipment where its technical characteristics meet the application requirements.
Its flexible fine-wire construction makes it convenient to route through suitable wiring ducts, tubes and protected installation paths.
The cable can be used in compatible fixed electrical installations in industrial and commercial environments.
The product has a 1 × 16 mm² configuration, making it suitable for electrical applications requiring this conductor cross-section.
The bare copper conductor combines electrical conductivity with flexibility for easier installation.
The Class 5 fine-wire construction provides flexibility and facilitates cable routing and termination.
PVC insulation provides electrical separation and protection around the copper conductor.
The cable is designed for compatible electrical installations with a nominal voltage of 1.1 kV AC.
The GN variant features green insulation for easy visual identification.
The ÖLFLEX® UNIPLUS range is designed with flame-retardant characteristics.
The fine-wire construction allows easier bending, routing and handling during installation.
Article 4520126U100 is listed by LAPP in ring packaging.
Suitable for compatible control panels, switchgear, distribution systems and fixed electrical installations.
| Specification | Details |
|---|---|
| Brand | LAPP |
| Product Series | ÖLFLEX® UNIPLUS |
| Product Name | ÖLFLEX® UNIPLUS 1X16 GN |
| Article Number | 4520126U100 |
| Product Type | Single Core Cable |
| Cable Configuration | 1 × 16 mm² |
| Number of Cores | 1 |
| Conductor Cross-Section | 16 mm² |
| Conductor Material | Bare Copper |
| Conductor Construction | Fine-Wire |
| Conductor Class | IEC 60228 Class 5 |
| Insulation Material | PVC |
| Cable Colour | Green |
| Colour Identification | Single-Coloured |
| Nominal Voltage | 1.1 kV AC |
| Test Voltage | 3 kV |
| Cable Shape | Round |
| Application Area | Fixed Installation / Flexible |
| Minimum Bending Radius – Fixed Installation | 6 × Outer Diameter |
| Temperature – Fixed Installation | -40°C to +80°C |
| Flame Retardant | Yes |
| Packaging | Ring |
| Copper Index | Approx. 153.6 kg/km |
| Product Weight | Approx. 175 kg/km |
| Manufacturer | LAPP |
| Article / SKU | 4520126U100 |
| Suitable Applications | Control Panels, Switchgear, Distribution & Industrial Wiring |
No reviews yet.