LAPP ÖLFLEX® UNIPLUS 1X2.5 GN – 4520122U100 is a professional 2.5 sq. mm single-core electrical cable designed for reliable electrical wiring, control panel connections, equipment wiring and suitable fixed-installation applications. Manufactured by LAPP, this cable is part of the ÖLFLEX® UNIPLUS series, which is designed for electrical and industrial wiring applications where dependable conductivity, flexible handling and reliable insulation are required.
The product features a single 2.5 mm² conductor and carries the LAPP article number 4520122U100. The GN designation indicates the green colour of the cable. Its single-core configuration allows the conductor to be routed individually within electrical panels, cabinets, equipment and other suitable electrical installations.
The cable incorporates a fine-wire bare copper conductor with Class 5 construction, providing a combination of good electrical conductivity and flexibility. The fine-wire construction makes the cable convenient to handle, bend and route during installation, particularly where neat and organized electrical wiring is required.
The conductor is protected with PVC insulation, which provides electrical separation between the copper conductor and surrounding components. PVC insulation also helps protect the conductor during normal handling, installation and operation.
The ÖLFLEX® UNIPLUS 1X2.5 GN is designed for a 1.1 kV AC RMS nominal voltage and a 3 kV test voltage, making it suitable for compatible low-voltage electrical installations. The cable range also features flame-retardant characteristics, making it suitable for applications where flame-retardant cable construction is required.
The 2.5 mm² conductor cross-section makes this cable suitable for a wide range of electrical wiring applications where a 2.5 mm² single-core conductor is required.
The conductor is made from bare copper and uses a fine-wire Class 5 construction. This construction provides good flexibility and makes the cable easier to handle during installation.
The flexible conductor can be conveniently routed through suitable:
The actual current-carrying capacity should always be determined according to the installation method, ambient temperature, grouping conditions, conductor arrangement and applicable electrical standards.
The LAPP ÖLFLEX® UNIPLUS 1X2.5 GN uses PVC insulation around the copper conductor.
The insulation provides electrical separation between the conductor and other components within the installation. It also helps protect the copper conductor during normal handling and installation.
PVC is widely used in electrical cables because of its practical combination of insulation performance, durability and flexibility.
The green insulation provides easy visual identification and allows the cable to be distinguished from other conductors in an organized wiring system.
The GN designation represents the green colour of the cable.
The green insulation provides clear visual identification during installation, inspection and maintenance. This can be useful when multiple individual conductors are routed within the same electrical panel or wiring system.
The colour of any conductor should always be used according to the applicable electrical standards and the identification scheme of the specific installation.
The ÖLFLEX® UNIPLUS 1X2.5 GN is designed with a 1.1 kV AC RMS nominal voltage rating.
This rating makes the cable suitable for compatible low-voltage electrical applications where the operating voltage requirements correspond to the cable's specifications.
The cable is also associated with a 3 kV test voltage, supporting electrical insulation testing and quality verification.
When selecting the cable for an actual installation, voltage rating should be considered together with current capacity, installation method, ambient conditions, cable grouping and applicable electrical regulations.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable electrical applications.
Flame-retardant cable construction is an important consideration in electrical installations where limiting flame propagation is required under specified test conditions.
This makes the cable suitable for consideration in applications such as:
The cable should be installed according to the manufacturer's recommended conditions and relevant electrical safety requirements.
The single-core construction allows the cable to be installed as an individual conductor within electrical systems.
Its fine-wire construction provides flexibility, which can make installation easier when the conductor needs to be routed around components or through confined spaces.
The cable can be conveniently used for:
Maintaining the recommended bending radius during installation helps avoid unnecessary mechanical stress on the cable.
The LAPP ÖLFLEX® UNIPLUS 1X2.5 GN – 4520122U100 can be considered for a variety of electrical and industrial applications.
The cable can be used for suitable internal wiring in electrical control panels where a 2.5 mm² single-core conductor is required.
Its flexible construction makes it convenient for routing individual conductors inside electrical cabinets.
The cable can be used for compatible electrical connections inside distribution boxes and electrical enclosures.
It can be considered for electrical connections in suitable industrial machinery and equipment.
The flexible fine-wire construction allows convenient routing through suitable wiring ducts and tubes.
The cable can be used in compatible fixed electrical installations where its voltage, conductor size and environmental characteristics meet the requirements of the application.
The cable features a 1 × 2.5 mm² configuration, suitable for electrical applications requiring a 2.5 mm² single-core conductor.
The bare copper conductor provides good electrical conductivity while the fine-wire construction offers flexibility during installation.
The Class 5 construction provides flexibility and makes the conductor easier to route and terminate.
PVC insulation provides electrical separation and protection around the copper conductor.
The GN version features green insulation for easy visual identification.
Suitable for compatible electrical installations within its specified voltage rating.
Provides the specified test voltage for electrical insulation testing.
The ÖLFLEX® UNIPLUS range incorporates flame-retardant characteristics for suitable applications.
The fine-wire construction allows easier bending, routing and termination.
Suitable for compatible control panels, cabinets, electrical equipment, distribution systems and industrial wiring applications.
| Specification | Details |
|---|---|
| Brand | LAPP |
| Product Series | ÖLFLEX® UNIPLUS |
| Product Name | ÖLFLEX® UNIPLUS 1X2.5 GN |
| Article Number | 4520122U100 |
| SKU | 4520122U100 |
| Product Type | Single Core Cable |
| Cable Configuration | 1 × 2.5 mm² |
| Number of Cores | 1 Core |
| Conductor Cross-Section | 2.5 mm² |
| Conductor Material | Bare Copper |
| Conductor Construction | Fine-Wire |
| Conductor Class | IEC 60228 Class 5 |
| Insulation Material | PVC |
| Cable Colour | Green |
| Colour Code | GN |
| Nominal Voltage | 1.1 kV AC RMS |
| Test Voltage | 3 kV |
| Cable Construction | Single Core |
| Cable Shape | Round |
| Application | Fixed Installation |
| Flame Retardant | Yes |
| Packaging | Ring |
| Manufacturer | LAPP |
| Series | ÖLFLEX® UNIPLUS |
| Article / SKU | 4520122U100 |
| Suitable Applications | Control Panels, Cabinets, Distribution & Industrial Wiring |
No reviews yet.